Garmin GPSMAP 162 - Manual (Page 72)

63
Reference
Main Menu:
Systm (System) Tab
Systm (System) tab— controls system setting for beeper, speed fi lter, languages, system mode,
simulator controls, restores factory settings, and displays software version.
The following settings are available:
• Beeper— controls audible beep. Select from ‘Off’, ‘Alarms Only’ (sounds for alarms/messages),
or ‘Key and Alarm’ (sounds for key presses and alarms/messages).
• Speed Filter— averages speed-readings. Choose from ‘Off’, ‘Auto’ (automatically controls fi lter-
ing), or ‘On’ (allows you to enter a value from 1 to 255 seconds).
• Language— select from 11 languages for the unit’s on-screen display.
• System Mode— select from ‘Normal’ (Normal Navigation) or ‘Simulator’ (For practice ONLY)
• Track Control*— ‘Auto Track’ will steer to the current navigation point. ‘User Track’ allows you
to enter a heading in the ‘Track’ fi eld.
• Speed*— lets you enter a speed.
• Track*— lets you enter a heading.
• Set Position*— allows to set your location while in simulator mode. See page 11, starting with
step 2, for additional instructions.
* These fi elds will only appear when the unit is in Simulator Mode.
The following options are available by pressing MENU from the “Systm” tab:
• Restore Garmin Setup— restores all settings to Garmin’s original setup values for the entire unit.
• Software Version— displays the unit’s software, basemap version and Unit ID.
Pages Tab
Systm (System) Tab