Garmin StreetPilot User Manual
Page 65
Reference
55
Creating a Route
5. To have intermediate points on the route, use this same procedure to select the first turn on the
route and press the ENTER key. If there is a single road that connects the new point and the
previous point, the route will follow that road. Otherwise, your route will follow a straight line
between the two points.
6. If you desire to have more intermediate turns (points) on the route, repeat the previous step.
(Continued on the following page)
Zoom out if necessary
Note How Route Line follows I- 90
Zoom Back In to Show Nearby Cities
Point to Road Intersections
Finding the Destination
Route Distance Displayed (Point to Point)
Entering last turn
In order for the route to follow roads, it is necessary to select all intermediate turns, including on
and off-ramps. The advantages of having the route follow the roads are that the distances and times are
more accurate, and the turn guidance is more specific, among others.
1
2
3
1
4
5
6
7