Garmin GPSMAP 175 - Manual (Page 45)

The mark key may also be used on the map page to mark the cursor
position or an on-screen navaid. To mark a navaid, select the desired navaid
with the cursor. The GPSMAP 175 will use the navaid text shown on the
cartography as the default comment.
To mark the cursor or navaid position with the M key:
1. Use the R keypad to move the cursor to the desired position or navaid.
2. Press the M key.
3. Highlight the ‘Use Map Posn?’ or the ‘Use NAVAID Posn?’ option and
press T.
4. To accept the waypoint with the default name, symbol and comment (the
date and time of creation), press T to confirm the ‘Done?’ prompt.
5. To enter a different name, symbol or comment, highlight the appropriate
field and press the T key.
6. After entering and confirming your changes, move the field highlight back
to the ‘Done?’ prompt and press T.
WAYPOINTS
Using the MARK Key
A. To create a
waypoint at an on-
screen navaid, move
the cursor over the
desired navaid.
B. Press the MARK key
and select the ‘Use
Navaid Posn?’
option. Press
EDIT/ENTER to
finish.
41
6
175 Manual 7/31/98 3:56 PM Page 41