Appendix – Garmin GPSMAP 175 User Manual

Page 81

Advertising
background image

The following formats are supported for connection to up to 3 NMEA devices:

• NMEA 0180/NMEA 0182

• NMEA 0183 version 1.5

Approved sentences —

GPBWC, GPGLL, GPRMB, GPRMC,
GPXTE, GPVTG, GPWPL, GPBOD

Proprietary sentences — PGRMM, PGRMZ (alt.), PSLIB

(beacon receiver control input)

• NMEA 0183 version 2.0

Approved sentences — GPGGA, GPGSA, GPGSV, GPRMB,

GPRMC, GPRTE, GPWPL, GPBOD

Proprietary sentences — PGRME (estimated error), PGRMM

(map datum)

PGRMZ (altitude), PSLIB
(beacon receiver control input)

DGPS

DGPS corrections are accepted in RTCM-104 v. 2.0 format through the

NMEA In (BROWN) harness lead. The GARMIN GBR 21 is the
recommended beacon receiver for use with the GPSMAP system. Other
receivers with the correct RTCM format may be used, but may not correctly
display status or allow tuning control from the GPSMAP 175 unit.

APPENDIX

Wiring and Specifications

77

B

The optional GARMIN GA 27 low-profile remote-

mount antenna is designed to be used with several
different GARMIN GPS units. To use this antenna with
the GPSMAP 175, simply plug the right-angle “MCX”
male connector on the end of the GA 27 cable into the
socket on the left side of the top of the unit.

Note: The GPSMAP 175 senses the electrical current

used by the GA27 in order to accept antenna input.
Antennas which do not use electrical input (such as the
GPS 45XL helix) will not function properly with the
GPSMAP 175.

GA

RM

IN

GB

R 2

1

175 Manual 7/31/98 3:58 PM Page 77

Advertising