Garmin GPSMAP 496 - Manual (Page 43)

a
vI
at
Ion
GPSMAP 496 Owner's Manual 35
A
vIAtIon
M
ode
P
Ages
> M
AP
P
Age
Additional Map Data
You can view the data that is currently loaded on your GPSMAP 496
unit and data card.
To review or change data card information:
1. Access the Map Page, and press MENU.
2. From the options menu, highlight Map Information, and
press ENTER.
Map Card Information Page
Map Family
highlighted.
Press ENTER
to vew the
ndvdual maps
in the family.
3. The first page shows the Map Families that are stored on the
data card and whether they are shown on the Map Page.
To change the setting for a Map Family, highlight the box next
to the Map Family name, and press ENTER to select (check
mark) or deselect (no check mark) the Show setting.
4. To view the list of maps within a Map Family, highlight the
name of the Map Family, and press ENTER.
5. To view detailed information about an individual map, highlight
the Map Name, and press ENTER. Highlight OK, and press
ENTER to exit the map information page.
6. To select or deselect individual maps, highlight the box next to
a map, and press ENTER to check or uncheck the Show box.
OR
Press MENU, and select one of the options (Show All, Hide
All, or Show Defaults), and press ENTER.
7. Press QUIT to exit the Map Information Page.