Garmin GNC 300 - Manual (Page 48)

The airport procedures page displays all the available approaches, SIDs and
STARs at any selected airport in the database, without placing a specific approach,
SID or STAR in the active route. This allows the pilot to quickly scan the procedures
of any nearby airport in case of an emergency or help plan future flights. You may
view the available non-precision approaches, SIDs and STARs by selecting the desired
list from the procedure type field.
To view the available procedures for a selected airport:
1. Press
W
and rotate
O
to display the procedures page.
2. Press
C
twice and rotate
O
to highlight the procedure type field.
3. Rotate
K
to select the approach, SID or STAR list.
4. Press
C
to remove the cursor.
Whenever there are more than two available procedures for a selected category, the
GNC 300 will display a scrolling arrow prompt on the left side of the list. To view addi-
tional procedures, simply rotate
K with the cursor removed. As you scroll through the
list, the arrow prompt will point ‘down’ to indicate additional listings below the dis-
played procedures, or ‘up’ to indicate additional listings above. If you’re in the middle
of a list, a double arrow will be displayed to indicate the list may be scrolled up or
down.
38
REFERENCE
Intersections &
User Waypoints
SECTION
3
WPT KEY
Airport Procedures Page
Identifier
(selectable)
Available
Procedures
Procedure Type
(selectable)
Scrolling
Arrow Prompt
SID procedures displayed.
STAR procedures displayed.
300 7/14/98 8:49 AM Page 38