Garmin StreetPilot 2650 - Manual (Page 56)

Reference
46
• Guidance and Status: The unit speaks guidance messages during route navigation, as well as status
messages. Guidance messages include such route navigation messages as “drive point eight miles
west, then turn right.” For each turn on a route, the voice gives instructions three times: after you
have completed a turn and are starting a new leg of the route; as you are approaching the next new
turn; and just before you reach the next turn. Status messages include phrases such as “lost satellite
reception.”
• Route Guidance: The unit speaks guidance messages during route navigation, as described above. It
does not give status messages.
• SPEAK Key Only: The unit only speaks when the SPEAK key is pressed (it will not talk otherwise).
Touchscreen Tone – Allows you to turn the touchscreen click sounds On or Off.
Attention Tone – Determines whether the voice prompts are preceded by a chime. This is turned off by
default.
Keypress Tone
– Allows you to turn the keypress beeper sounds On or Off. A beep confirms that a key
(such as MENU, FIND, SPEAK) on the unit or remote has been pressed.
Guidance tab
Off-Route Recalculation
– Controls how the StreetPilot recalculates the route when you depart from its
original instructions.
• Prompted: You will be asked if you want the unit to recalculate the route.
• Automatic - Announced: The unit will automatically recalculate and announce to the user it is
recalculating.
• Automatic - Silent: The unit will automatically recalculate the route, but it will not announce to the
user it is recalculating.
• Off: The unit does not recalculate when you go off route.
Next Turn Pop-Up – Controls when the Next Turn page is displayed. Recall that the Next Turn page only
appears during an active (or simulated) route as you are approaching a turn.
• Off: The Next Turn page will never appear.
Select Both on the Guidance tab, and the Next Turn
page will automatically appear as you approach a turn.
If you wish to hear the instructions again, press the
unit’s SPEAK key.
The Attention Tone field determines whether voice
prompts are preceded by a chime.
Customizing the Overall Setup