Garmin GPSMAP 192C - Manual (Page 83)

GPSMAP 192C Owner’s Manual 77
M
AIN
M
ENU
> A
LARM
T
AB
To set an alarm:
1. Use the ROCKER to highlight a sub tab.
2. Highlight the field you want activate, and press ENTER.
3. Change the mode to the setting, and press ENTER.
4. Highlight the next field to the right, press ENTER, enter the
settings, and press ENTER to finish.
5. If you want the alarm to display and beep until
acknowledged, highlight the Persist box, and press
ENTER.
If Persist is
checked, an alarm
stays active until
acknowledged.
Press ENTER to
acknowledge an
alarm.