Getting started, Mounting the device – Garmin nuvi 50LM User Manual
Page 5
nüvi 30/40/50 Owner’s Manual
1
Getting Started
‹
WARNING
See the Important Safety and Product Information
guide in the product box for product warnings and
other important information.
1
Connect the device to vehicle power (
).
2
).
3
Register the device (
).
4
Check for updates.
• Software updates (
).
• Free map update (
).
Mounting the Device
‹
WARNING
This product contains a lithium-ion battery. To prevent
the possibility of personal injury or product damage
caused by battery exposure to extreme heat, remove
the device from the vehicle when exiting or store it
out of direct sunlight.
Notice
Before mounting the device, see the Important Safety
and Product Information guide for information about
laws pertaining to windshield mounting.
Charge your device as you drive before using it on
battery power.
1
Plug the vehicle power cable
➊
into the USB port
➋
on the device.
2
Press the suction cup
➌
to the windshield.
3
While pressing, flip the lever
➍
back toward the
windshield.
4
Snap the mount
➎
onto the suction cup.