Waas capability – Garmin GPSMAP 182C User Manual

Page 47

Advertising
background image

GPSMAP 182/182C Owner’s Manual

41

M

AIN

M

ENU

>

GPS T

AB

WAAS Capability

The GPSMAP 182/182C is capable of receiving WAAS (Wide

Area Augmentation System) satellite signals. WAAS is an FAA

(Federal Aviation Administration) funded project to improve the

overall accuracy and integrity of the GPS signal for aviation use,

but land/sea based users can also benefit from this system. At this

time, the system is still in the development stage and is not fully

operational.
There are currently two WAAS satellites that can be received in

the U.S.A., one over the Atlantic Ocean and one over the Pacific

Ocean, in a geo-stationary orbit over the equator. Effective use

of the WAAS satellite signal may be limited by your geographic

location in relation to those satellites, now in developmental

service. WAAS satellite signal reception requires an absolute

clear view of the sky and works best when there are no nearby

obstructions such as buildings and mountains.

WAAS satellites are numbered 33 or higher when viewing the sky

view on your GPSMAP 182/182C. Initial reception of the WAAS

signal can take up to 15-20 minutes, then 1-2 minutes afterwards.

When WAAS differential correction has been received for GPS

satellites (numbers 32 or below), a D appears in the signal bar of

the sky view and 2D or 3D Differential appears in the receiver

status. To learn more about the WAAS system, its satellite positions

and current state of development, visit the FAA web site

(http://gps.faa.gov). Because WAAS requires CPU resources of the

GPSMAP 182/182C to search for and track the satellites, you can

disable the WAAS feature to improve unit performance if WAAS

reception is not available in your area. Refer to the “Appendix” for

more information.

Advertising