Garmin GPSMAP 182C - Manual (Page 51)

GPSMAP 182/182C Owner’s Manual 45
M
AIN
M
ENU
> T
IDE
T
AB
The tide curve shows as a shaded area, where higher tides are taller
(blue) and lower tides are shorter (red). The solid, horizontal line
(with the current tide box on the left) indicates the current tide
height. The figure to the left of the line shows the current tide level
in feet. The Mean Lower Low Water (MLLW) appears as a solid,
horizontal line near the bottom of the chart (This line only appears
if the tide ranges to the zero value or below). The numbers directly
below/above LCL and STA indicate the maximum/minimum levels,
respectively. The four data fields below the chart, indicate event
times and levels the tide changes starting in the upper left field,
going downward, then to the upper right and down again.
To select the nearest tide station from you current
location:
1. From the Tide tab, highlight the At field, and press ENTER.
2. Highlight a tide station on the list, and press ENTER twice.
You can automatically search for the nearest station using a variety
of search locations. You must select a location within 100 nm of
a tide station. If you are not within this range, you see a message
“None Found.” Use the Nearest To Other Find option and select a
location closer to a tide station.