Replacing the control panel, Small form-factor computer – Dell OptiPlex GX270 User Manual
Page 7
2.
To prepare the computer cover for removal, release the three computer cover tabs (one tab is located by the CD drive and two tabs are located by the
I/O panel).
3.
If necessary, remove the computer cover screw.
4.
Close the computer and remove the computer cover.
5.
Remove the screw that secures the control panel to the computer, and pull the control panel away from the computer.
Replacing the Control Panel
Small Form-Factor Computer
1.
Replace the control panel and the control-panel shield.
1 computer cover tab (remove the CD drive to access this tab) 4 bottom panel
2 top-panel tabs
5 computer cover screw
3 top panel
6 computer cover tabs (2)
NOTE:
To release the tab located by the CD drive, you can pry the computer cover away from the computer and pull out the tab.