Dell Latitude D630c - Manual

Dell™ Latitude™ D630c System
Board
Configuring the Replacement Base of Your Dell
Latitude D630c Computer
When you replace the base of your computer, you must affix a label
indicating the management mode. Labels are supplied in the base kit.
To ensure that you affix the correct management mode label to the new base:
1 Remove the battery from the old base, and locate the label affixed to the
inside of the battery bay (see illustration below).
For instructions about removing the battery, see "Replacing the Battery" in
your
User’s Guide.
label
September 2007
HW379eb1.fm Page 1 Monday, October 15, 2007 12:40 PM