Replacing the computer cover – Dell Dimension 5150__E510 User Manual
Page 59
Replacing the Computer Cover
Dell™ Dimension™ 5150/E510 Service Manual
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in the
Product Information Guide.
1. Ensure that all cables are connected, and fold cables out of the way.
2. Ensure that no tools or extra parts are left inside the computer.
3. Align the bottom of the cover with the tabs located along the bottom edge of the computer.
4. Using the tabs as leverage, rotate the cover downward and press down to close it.
5. Ensure that the cover is seated correctly before moving it to the upright position.
NOTICE:
To connect a network cable, first plug the cable into the network port or device and then plug it into the
computer.
6. Connect your computer and devices to electrical outlets, and turn them on.