Dell Dimension 9200 - Manual (Page 24)

b. Connect the network cable to the add-in network adapter's connectors. Do not connect the network cable to the integrated connector on the
back panel.
15. Install any drivers required for the card as described in the card documentation.
Removing a PCI Express Card
1. Follow the procedures in Before You Begin .
2. Remove the computer cover (see Removing the Computer Cover ).
3. If present on your computer, rotate the lever on the chassis wall upward.
4. Push the two release tabs on the card retention door from the inside to pivot the door open; the hinged door will remain in the open position.
5. If your computer includes a card retention mechanism to secure the x16 card, press the release tab downward gently and then pivot the mechanism
upward to access the card slots.
1 card retention
door
2 release tabs
(2)
3 lever on chassis wall (may not be present on all
computers)
4 filler bracket 5 alignment
guide
6 alignment bar
1 release tab 2 card retention mechanism 3 card retention door