Installation – American Magnetics 4Q12125PS-430 Integrated Power Supply System User Manual
Page 32
Advertising
14
Rev.
5
Installation
Power Requirements
Supply system. Refer to Figure 2-1 for a physical view of the Model
4Q12125PS-430 interconnects.
Refer to Figure 2-2 on page 15. Ensure the cabling is connected in the
following manner
1
:
a. Connect the Slave power supply
OUTPUT terminal (17) to the
positive magnet current lead (2).
Note
The use of locking hardware is recommended for all high-current
connections.
1. Some connections take more than one cable - read the complete procedure before
beginning.
Figure 2-1.
Typical Model 4Q12125PS-430 System Rack Interconnections
Advertising