Sony SLV-M20HF - Manual (Page 17)

17 Basic Operations
Basic Operations
Daily/weekly recording
In step 2 above, push the cursor stick to . to select the recording pattern.
Each time you push the cursor stick to ., the indication changes as shown
below. Push the cursor stick to > to change the indication in reverse order.
Tips
• To set the channel, you can also use the CH +/– or number buttons.
• You can set the channel with the shuttle ring during stop. However, you cannot set
the channel with the shuttle ring on the remote commander when:
– you set CABLE MOUSE in the CABLE BOX CONTROL menu to ON.
– you press JOG so that the remote commander is in jog mode.
• To set the tape speed, you can also use the SP/EP button.
• When you are recording a program in SP mode and the remaining tape becomes
shorter than the recording time, the tape speed is automatically changed to EP
mode. Note that some noises will appear on the picture when the tape speed is
changed. If you want to keep the same tape speed, set AUTO TAPE SPEED to OFF
in the ADVANCED OPTIONS menu (page 35).
• To lock the VCR after setting the timer, see page 14.
Note
• If you are using cable box control, you cannot select “LINE1” or “LINE2.”
the current date n SUN-SAT n MON-SAT n MON-FRI n EVERY SAT .....
n EVERY MON n EVERY SUN n 1 month later n (date counts down) n
the current date