DB Drive E5 HLC6 - Manual (Page 2)

-1-
We would like to congratulate you on your purchase of the
E5 HLC6; a 6 channel, high-performance line output converter.
The E5 HLC6 will accept two, four, or six channels of
Speaker-level signal from a factory-installed amplifier or
Source unit and convert it into a high-quality, low-noise pre-amp
signal. Therefore the
E5 HLC6 will allow you to use your factory
installed source unit but give you the ability to add any high
performance aftermarket amplifier and processor. Wether this
is your first product or you are already a firm believer, you will
definitely enjoy how great the
E5 HLC6 can make your
High performance stereo system sound.
Please read these instructions carefully before beginning to install
your new
E5 HLC6. Proper installation and adequate tuning will
help you get optimal sound quality results.
- Six Input & Output Channels
- Speaker-Level Inputs
- Signal Sensing Inputs
- Level Matching Controls
- 12 Volt Remote Trigger Output
- 24 kT Gold Plated RCA Connectors