Principles about starting the server, 3 overview on main window, 1 introduction – EVS GX Version 1.00 - February 2011 User’s Manual User Manual
Page 26: Overview on main window, Introduction, Ntroduction
Issue 1.0.C
GX server – Version 1.0 – User’s Manual
EVS Broadcast Equipment – February 2011
20
P
RINCIPLES
A
BOUT
S
TARTING THE
S
ERVER
Once the GX server is switched on, users can connect to and work on the server
via the web interface.
The following principles apply with a GX server:
•
The GX server is not automatically started when it is switched on.
•
Users need to start the GX server manually via the Start Server button in
the web interface when they want to play out the prepared fill and key clips.
•
The GX server will only respond to the commands from the control protocol
once the GX server has been started.
•
When the GX server is started, it is not possible to import original sequences
and/or create GX clips via the web interface until the server is stopped.
4.3 OVERVIEW ON MAIN WINDOW
4.3.1 I
NTRODUCTION
The main window in the user interface contains two main areas shortly described
below:
Import area
Manage area
Access to
Server Control page