Negative delay, Example – EVS GX Version 1.00 - February 2011 User’s Manual User Manual
Page 59

GX server – Version 1.0 – User’s Manual
EVS Broadcast Equipment – February 2011
Issue 1.0.C
53
Video Raw Material
00:00:01:00
GX Clip IN
00:00:00:00
GX Clip OUT
00:00:01:24
Audio Raw Material
GX Clip
Video Track
00:00:02:00
Audio Track
SILENCE
00:00:00:00
Note
Possible IN and OUT points defined on the audio track are taken into
account.
Negative Delay
If the delay is negative (this means the audio track starts before the video track),
the start of the audio will be trimmed.
Example
In the following example, a negative delay of 10 milliseconds has been defined. In
other words, the first 10 milliseconds of the audio track are trimmed and the rest
of the audio track will then be played normally from the IN point until the audio
track OUT point.
Video Raw Material
GX Clip IN
00:00:00:00
GX Clip OUT
00:00:01:24
Audio Raw Material
GX Clip
Video Track
00:00:02:00
Audio Track
AUDIO TRIMMED
00:00:01:00
00:00:00:00