EVS XSense Version 10.04 - January 2011 Operating Manual - Manual (Page 11)

Issue
10.04.A XSense – Version 10.04 – Operating Manual
EVS Broadcast Equipment – January 2011
2
1. Initial Configuration
1.1 APPLICATION SELECTION
The EVS software is used for configuration and maintenance operations. It is also
used to select which application configuration to run, since EVS disk recorders
have the ability to run various configurations. In the associated AVCFG module,
you can also specify the channel configuration you want to use and several audio
and video parameters.
When turning on the EVS mainframe, the first step is the PC boot sequence, then
the EVS software is started:
• If a default application has been previously selected, this application will start
automatically after a few seconds if no key is hit.
• If a default application hasn't been defined or if the space bar is hit, the
system will remain in the EVS main menu and wait for the operator's next
command.
Note
An application called ‘XSense’ will be available in the Application
window.
You will find complete information about regarding the EVS Menu in the XT Tech
Ref Software manual.