EVS XSense Version 10.04 - January 2011 Operating Manual - Manual (Page 156)

XSense – Version 10.04 – Operating Manual
EVS Broadcast Equipment – January 2011
Issue
10.04.A
147
Note
It is possible from the VGA to connect back to the last machine connected
by pressing ALT+<TAB>.
13.4 OPERATIONS
When the remote system is selected, the operation with remote clips or remote
trains is similar to the operations on the local system.
13.4.1 H
OW TO
R
ECALL
/P
LAY
B
ACK A
R
EMOTE
C
LIP
1. Select the Clip mode in the Network menu.
2. Select the remote EVS server from the list:
The LCD display returns to the normal mode
3. Select the clip page 1, 2, 3, … to 10 (PAGE key).
When selecting a server, it will automatically reconnect to the page and bank
that was last used.
4. Select the bank in which the desired clip is located
5. Choose the clip required (F1 - F10).
6. If all clips are present (from Camera A, B, C and D), they will appear in their
respective locations (Channel A, B, C or D).
The label of a remote clip is different in order to identify it easily among other
clips: