EVS XTnano Version 11.02 - July 2013 Operation Manual - Manual (Page 33)

Let's say an IN point has been marked, and you activate the PRV CTL and sets to ON the
SW to IN option: The slow motion of one camera can be started from this IN point. The
operator selects another camera in the PRV output and, via the TAKE button, can auto-
chain cameras from the same IN point on the PGM output.
3.3. Multi PGM Mode
3.3.1. Multi PGM Overview
Introduction
Multicam has two modes for its basic operation, 1PRV+PGM and Multi PGM:
• The 1PGM+PRV mode is more powerful as it allows interaction between all outputs.
Synchronized replays can be rolled and chained between the cameras with either a
mix, a wipe, or a cut between them.
• The Multi PGM mode is more basic but gives the operator independent control of all
outputs. These outputs can be controlled together (such as jogging back to a certain
action on all outputs) or individually (either PGM 1 or 2).
OPERATION MANUAL Nano 11.02
3. Control Modes 25