EVS XTnano Version 11.02 - July 2013 Operation Manual - Manual (Page 66)

4.4.8. Changing the Primary Camera of a Clip
You can change the primary camera of a clip in the VGA interface.
To change the primary camera of a clip, proceed as follows:
1. In the Clip screen, move the cursor to the desired camera.
2. Press F4 on the keyboard or click with the stylus on the corresponding area in the
Function bar.
◦ This camera becomes the new primary camera.
◦ If the selected camera is a secondary camera (indicated by “=”), it becomes the
primary camera and the previous primary camera becomes the secondary
camera.
58 4. Clip Management
EVS Broadcast Equipment S.A. Issue 11.02.A July 2013