How to edit a parameter profile – EVS XEDIO Manager Version 4.35 - August 2013 User Manual User Manual

Page 104

Advertising
background image

Allow Export to Target

When selected, allows to export the storyboard to a
predefined target.

Allow Text Insertion

Allows to insert text.

Output All Stereo to
ST1

Only applicable for “all stereo” edits, not for 5.1.
When selected: all stereo tracks are mixed out to ST1.
Otherwise: ST1 to ST1, ST2 to ST2, ST3 to ST3,…

9.2.13. How to Edit a Parameter Profile

To edit the parameters values of a profile, proceed as follows:

1. In the Application Selection area, select <GENERAL> or the application in which a

parameter profile should be edited.

2. Select the profile in the Profile Selection area.

3. In the Parameters area, edit the parameter in the Variant Values column

◦

by selecting or clearing the box corresponding to a parameter (check box)

◦

by adding the required value (field to enter a value)

◦

by selecting the required value (option list)

◦

by defining it in a specific window for a name format string (see section "How to
Modify a Name Format String" on page 95)

◦

for the audio parameters, see section "How to Define New Default Audio Channel
Assignment" on page 97.

The default values can be changed by editing the <default> profile.

4. Click the Save button to save the selected profile.

Note
The modifications from the <default> profile are highlighted in the Parameters
area.

94

9. Softwares

EVS Broadcast Equipment SA

Issue 4.35.B - August 2013

Advertising