EVS IPDirector Version 6.2 - June 2013 IPEDIT User Manual - Manual (Page 191)

6.13.6. Manual Swap Definition in the Swap/Mute
Zoom Mode
Description
You can swap one or more channels of an audio track and apply the swap to these
channels from a point to another point of the audio track. You will specify the start and end
points as follows:
• with a mark IN on the start point and a mark OUT on the end point.
• with the nowline on the start point. In this case, the swap is applied up to the end of
the element where the nowline is positioned.
How to Define a Swap/Mute in Swap/Mute Zoom
Mode
You can define such a swap in the Swap/Mute Zoom mode.
To do so, proceed as follows:
1. Click the Swap/Mute Zoom Mode button to access the Swap/Mute Zoom
mode.
Depending on the audio configuration of the output channels, an audio track may
contain up to 16 channels. In Swap/Mute Zoom mode, the audio track shows a
number of lines reflecting the number of audio mono channels.
Example of a 16-channels track:
IPDirector - Version 6.2 - User Manual - IPEdit
6. Timeline 179