EVS XT2 Version 11.01 - November 2012 Configuration Manual - Manual (Page 72)

3.2.4. SLSM Configurations
Introduction
SLSM Principles
This section details the available multi-phase SLSM configurations on XT2 servers.
In SLSM configurations, a supermotion recorder of a two- or three-phase camera accounts
for one logical channel, but corresponds respectively to two or three physical channels.
Overview on Configurations
The tables in the following sections show the available SLSM configurations with an XT2
6U server and XT2 4U server, and how the BNC connectors should be cabled.
Note
Specific SLSM configurations for 1080p/3D dual link configurations are
presented in the section "3D/1080p SLSM Configurations" on page 1.
XT2 4U Servers
Available Configurations with SLSM 2-Phase Cameras
IN4/OUT1 IN3/OUT2 IN2/OUT3 IN1/OUT4
#REC
SLSM
2x
#REC #PLAY
Prim.
Link Sec.
Link Prim.
Link Sec.
Link Prim.
Link Sec.
Link Prim.
Link Sec.
Link
1 0 0 REC1,
2 REC1,
1
1 1 0 REC2 REC1,
2 REC1,
1
1 2 0 REC3 REC2 REC1,
2 REC1,
1
2 0 0 REC2,2 REC2,1 REC1,
2 REC1,
1
1 0 1 PLAY1 REC1,
2 REC1,
1
1 1 1 PLAY1 REC2 REC1,
2 REC1,
1
1 0 2 PLAY1 PLAY2 REC1,
2 REC1,
1
XT2 Server - Version 11.01 - Configuration Manual
3. Multicam Configuration 62