Multiviewer settings, User interface – EVS XT2 Version 11.02 - July 2013 Configuration Manual User Manual
Page 140
Advertising
Setting Name
Basic & Advanced
Technical Setup
OUT B J3
X
X
Aspect ratio
X
X
SD Edge Enh.
X
X
REC HD->SD Low latency
X
X
3.6.2.
Multiviewer Settings
User Interface
The Multiviewer settings allow specifying the settings related to the Multiviewer display
such as the number of channels to combine and display, the audio and output video
configuration.
These fields are available in the Multicam Configuration window, Monitoring tab .
Note
The Multiviewer settings will only be displayed if a Multiviewer board is present
on the EVS server.
The following screenshot presents the settings page of the Monitoring tab in the server-
based application and highlights the Multiviewer settings area.
132
3. Multicam Configuration
EVS Broadcast Equipment S.A.
Issue 11.02.A July 2013
Advertising