Evs controller settings, Controller settings, Introduction – EVS XT2 Version 11.02 - July 2013 Configuration Manual User Manual
Page 201: User interface
3.9.11. EVS Controller Settings
Introduction
The EVS Controller settings gather:
◦
Settings related to the behavior of the keys, lever or jog of the Remote Panel.
◦
Settings associated to XFile or the EVS server itself.
Warning
Most of the settings are only available or applicable with base configurations
associated to the use of an EVS Remote Panel (LSM Remote, XSense
Remote).
User Interface
These fields are available in the following interfaces:
•
in the Multicam Configuration window, Operation tab, in the basic display mode:
◦
on page 4 on the server-based application
◦
on page 1 on the web-based interface
•
in the Operational setup menu of the Remote Control Panel (9.X)
The following screenshot presents page 4 of the Operation tab in the server-based
application, where the EVS Controller settings are available:
CONFIGURATION MANUAL XT2 Server 11.02
3. Multicam Configuration
193