EVS Xfile Version 2.16 - November 2011 User Manual - Manual (Page 33)

XFile Version 2.16 – User Manual
EVS Broadcast Equipment – November 2011
Issue 2.16.A
23
Important
Prior to modify the Disk Writing Mode, it is strongly recommended to
check the synchronization between the paths, especially when clips have
already been backed up in the involved paths. Otherwise, this could
results in data inconsistencies.
Backup Folder
The Backup Folder field specifies the folder destination to save the backup files.
It must be located in an XFile path. Enter a folder name directly in the Backup
Folder field or click the Browse button to select a folder. If you enter the name
for a new folder in the Backup Folder field, the folder will be created at first
backup.
The system checks the clips present into the session folder and its sub-folders. If
a clip is not present and fulfills the criteria defined in the Autobackup selection
tab, this clip is automatically backed up.
Note
In dual disk mode, when the first disk is full, the system automatically
switches to the same folder of the second disk.
Super Motion Backup Mode
Super Slow Motion (SSLM) clips can be obtained by generating a single flow from
2 or 3 cameras. So, 2 or 3 pictures have the same timecode and, when a SSLM
clip is played with all frames in the Edit Clip module, the duration is twice (with 2
cameras) or three times longer and audio is no more synchronized. A clip played
at 100% seems to be played at 50 or 33%.
The SuperMotion Backup Mode > All Frames with Desynchronized Audio option
enables the backup of all the frames of the SSLM clips with the audio. In this
case, timecode reference is not consistent.
The SuperMotion Backup Mode > Ream Time (1/2 or 1/3 frames with audio)
option backs up 1 frame over 2 or 3 (depending on the Super Motion Rec mode)
and keeps the audio. Audio and timecode are consistent.
The selected option will be reflected in the Media Info tab of the Maintenance
Mode window. Nb Videos = 1 (Real Time) or 3 (All Frames). Refer to section
3.10.2 ‘Media Info Area’ on page 83.
Audio Mode
Selecting the Stereo option results in grouping EVS server mono channels in
stereo channels.
24 bits samples can be down converted to 16 bits by selecting the 16 bits option
or kept as it is by selecting the 24 bits option.