4 tab 4 – scan folder, Auto restore, Enable autorestore at start – EVS Xfile Version 2.16 - November 2011 User Manual User Manual
Page 40: Enabling configuration, Scan folder, Tab 4 – scan folder, Older
Issue 2.16.A
XFile Version 2.16 – User Manual
EVS Broadcast Equipment – November 2011
30
3.3.4 T
AB
4
–
S
CAN
F
OLDER
A
UTO
R
ESTORE
The Auto Restore function enables the automatic restore or copy of files from a
folder to a defined location on an EVS video server. This is done through the GBE
or the SDTI network.
The AutoRestore Mode can be activated from the main XFile window by clicking
the AutoRestore button.
Enable AutoRestore at Start
If the Enable AutoRestore at Start box is selected, the AutoRestore Mode will be
active as soon as XFile is started.
Enabling Configuration
Up to 5 different configurations can be pre-defined. To do so, select a
configuration number in the Config field, fill in all the other fields and click OK.
To enable one of these configurations, select it the Config field, select the Enable
Config box and click OK. Some or all of the predefined configurations can be
enabled.
Scan Folder
This field defines the folder to scan for backup files to be restored. It must differ
from the XFile data path.