EVS MulticamLSM Version 10.01 - July 2009 Operating Manual - Manual (Page 12)

EVS Multicam Version 10.01 – Operating Manual
EVS Broadcast Equipment SA – July 2009
Issue
10.01.F
3
1. Initial Configuration
1.1 APPLICATION SELECTION
The EVS software is used for configuration and maintenance operations. It is
also used to select which application configuration to run, since EVS disk
recorders have the ability to run various configurations (LSM 2REC 4PLAY,
LSM 3REC 3PLAY, LSM 4 REC 2 PLAY, SLSM, SLSM+1REC, etc.). In the
associated AVCFG module, you can also specify the channel configuration
you want to use and several audio and video parameters.
When turning on the EVS mainframe, the first step is the PC boot sequence,
then the EVS software is started:
• If a default application has been previously selected, this application will
start automatically after a few seconds if no key is hit.
• If a default application hasn't been defined or if the space bar is hit, the
system will remain in the EVS main menu and wait for the operator's
next command.
You will find complete information about regarding the EVS Menu in the XT
Tech Ref Software manual.