EVS MulticamLSM Version 10.01 - July 2009 Operating Manual - Manual (Page 36)

EVS Multicam Version 10.01 – Operating Manual
EVS Broadcast Equipment SA – July 2009
Issue
10.01.F
27
6.1.2 O
PERATIONAL
M
ENU
Rst Cam Local Sync Prv 2nd CTRL
Cam A Cam B Cam C Cam D
CAM A/ B /C /D
This parameter allows selecting the camera on the PGM output if PRV CTL
is OFF and on PRV output if PRV CTL is ON.
Note
In 5CAM configuration (5 recorder channels and 1 player channel)
or when loading a clip where CAM E or F exists, the operational
menu will display:
Rst Cam Local Sync Prv 2nd CTRL
Cam A Cam B Cam C --->
By pressing the D key (- - - > ), the operator has access to the D, E and F
cameras. The operation menu becomes:
Rst Cam Local Sync Prv 2nd CTRL
Cam D Cam E Cam F <---
Press the D key (< - - - ) to return to CAM A, B, C selection.
R
ST
C
AM
This function restores the position of cameras on the active channels: CAM
A on PGM1, CAM B on PRV.
Note
When a clip/playlist is loaded on a channel, switching back to Live
mode will recall the record train, which was last used on that
output. This avoids too frequent uses of the RST CAM function.