EVS XTnano Version 11.01 - November 2012 Operation Manual - Manual (Page 66)

Issue
11.01.C
nano series Servers - Version 11.01 – Operating Manual
EVS Broadcast Equipment SA – November 2012
58
5. The operator can also restripe the timecode of the IN point of the clip to a new value.
Press ALT+T, type the desired value and confirm with ENTER. When creating the
clip, this timecode will replace the original timecode of the Short IN point.
6. Press ALT+S to save the clip(s). The operator still has the opportunity to rename the
clip during this operation. He can then save the clip to the current cursor location by
pressing ENTER, or to the first available clip location on the current server by
pressing ALT+U.