EVS INSIO Version 1.0 - October 2009 User's Manual - Manual (Page 62)

INSIO Version 1.0 – User Manual
EVS Broadcast Equipment – October 2009
Issue 1.0.D
55
3.
Press the Load Clip button
The clip is loaded on the Video Player.
The clip names are displayed on the respective player channel lines, in the
Review tab.
4. Repeat steps 1 to 3 for each clip you want to load.
5. You can unload a clip by selecting the line in the Review tab and pressing
the Unload Clip button.
Loading Clips Manually on a Preset of Playback Channels
How to Define Preset of Playback Channels
Once you have loaded clips on player channels in a specific way, which means,
the clip coming from a specific camera onto a specific player channel, you can
save this configuration as a preset to be able to use it later without having to
reload each clip one after each other. Up to 8 preset player channel configurations
can be saved.
To define a preset player channel configuration based on the order clips have
been loaded, proceed as follows:
1.
Press the Presets button .
A menu with the list of existing Presets, if any, and empty Presets fields is
displayed.
2. Press the Save button.
3. Select an empty line.
A dialog box opens.