EVS INSIO Version 1.0 - October 2009 User's Manual - Manual (Page 64)

INSIO Version 1.0 – User Manual
EVS Broadcast Equipment – October 2009
Issue 1.0.D
57
How to Load Clips Automatically
To automatically load clips from a take you have just recorded on a selection of
player channels, even if the take has not yet been saved on the server, proceed
as follows:
1. Press the Auto Review button to activate the Auto Review mode.
2.
Press the Presets button and select one of the Preset configurations
from the list.
3. Record the take by pressing the Start/In button then the Stop/Out button.
As soon as the Stop/Out button is pressed, clips recorded by the cameras
defined in the selected preset player channel configuration are loaded on
the player channels defined in the preset.
4. If required, press the Presets button after the automatic loading of clips and
select another preset configuration.
Clips recorded by the cameras defined in the newly selected preset player
channel configuration are loaded on the player channels defined in the
second preset.