Display on the vga, Display on the osd, Loop – EVS XSense Version 10.03 - July 2010 Operating Manual User Manual
Page 135

Issue
10.03.A
XSense – Version 10.03 – Operating Manual
EVS Broadcast Equipment SA – July 2010
126
In dual stereo mode
*PL11/03* LEFT 06:42:22
V Mix 02:25 Spd.Unk
A Mix 02:25 A.Del. 00:00
IN-00:00:00 OUT+00:00:27
00:10
3→1 3→3
4→2 4→4
12:23:45:13 00:07:13 100
112B/04 ClipName 999/999
In stereo mode
*PL11/03* LEFT 06:42:22
V Mix 02:25 Spd.Unk
A Mix 02:25 A.Del. 00:00
IN-00:00:00 OUT+00:00:27
00:10
2→1
2→2
12:23:45:13 00:07:13 100
112B/04 ClipName 999/999
One can set as many swap points as needed.
If only an IN swap point is set for one clip, the audio tracks will be reset by default
for the next clip in the playlist.
Please note that when a swap point is set, a cross-fade is played between the
original audio track and the new track. The duration of the cross-fade is the
default audio transition.
When a swap point is present in a playlist, the display on the VGA and on the OSD
changes: a “*” is added next to the audio Fx information.
Display on the VGA
Display on the OSD
*PL11/03* LEFT 06:42:22
V Mix 02:25 Spd.Unk
A Mix*02:25 A.Del. 00:00
IN-00:00:00 OUT+00:00:27
LOOP
12:23:45:13 00:07:13 100
112B/04 ClipName 999/999