EVS XSense Version 10.03 - July 2010 Operating Manual - Manual (Page 88)

XSense – Version 10.03 – Operating Manual
EVS Broadcast Equipment SA – July 2010
Issue
10.03.A
79
Keywords
They can be selected for use as search criteria the same way they were selected
to be assigned to a clip, in LIST or NUMERIC mode. Up to 3 keywords can be
selected as search criteria. If all 3 keywords locations are used, some of them
must be cleared before selecting a new keyword. Press CLEAR + F1 / F2 / F3 to
clear to corresponding keyword location.
Ranking
A ranking can also be used as the only search criteria, or can be combined to the
keywords as an additional criterion. Press the B key several times to select the
desired ranking.
The RESET key (SHIFT+A) can be used at any time to clear all 3 keyword
locations and reset the ranking to the lowest level.
Archive
This field allows selecting archive status for search criteria.
Parameter On the Remote
None (default) Archive
Clips not archived >Archive
Clips to be archived >Archive (blinking)
Clips archived >Archive
It is possible to include trains in the search. The B key allows to toggle between
CLIPS/CLIPS+REC/REC.
From Date / To Date
Selecting a From Date and To Date can be done using the SHIFT+C and SHIFT+D
keys. Pressing on any of those keys changes the display on the key to dd/mm/yy
to indicate the date format. The F keys are used to enter the date, the Clear key
being the <BACKSPACE>.
1 keyword89012 2 2 keyword89012 3 keyword89012
F1:action_1 F6:action_6
F2:action_2 F7:action_7
F3:action_3 F8:action_8
F4:action_4 F9:Prev.page
p.01
F5:action_5 F0:Next page
Reset Archive FromDate ToDate
Return *** Srch Loc Srch Net