Audio meters osd settings, Cue number on osd, Osd on outputs – EVS XT2 Version 11.01 - November 2012 Configuration Manual User Manual
Page 190: Osd on inputs, Background, Introduction
Cue number on OSD
Description
Enables / disables the display of the cue point number on the
OSD of the output monitors when a cue point is recalled inside
a record train.
Values
Yes (default) / No
OSD on outputs
Description
Enables / disables the OSD on the play channels.
Values
Yes (default) / No
OSD on inputs
Description
Enables / disables the OSD on the record channels.
Values
Yes (default) / No
Background
Description
Applies a dark gray background to the OSD display.
Values
Yes / No (default)
3.9.3.
Audio Meters OSD Settings
Introduction
The Audio Meters OSD settings allow users to specify whether and how the audio meters
are to be displayed on the OSD.
These fields are available in the following interfaces:
•
in the Multicam Configuration window, Operation tab, in the basic display mode on
page 1 on the server- and web-based interfaces.
•
in the Operational menu of the Remote Control Panel (1.2).
The following screenshot presents page 1 of the Operation tab in the server-based
application, where the Audio Meters OSD settings are available, and highlights this
settings area:
XT2+ Server - Version 11.01 - Configuration Manual
3. Multicam Configuration
180