EVS IPDirector Version 4.4 - March 2008 Part 2 User's Manual - Manual (Page 115)

Issue 4.4.C IP Director Version 4.4 – User Manual – Part 2 – Logging and Browsing
EVS Broadcast Equipment – March 2008
102
3.6.7 H
OW TO
V
IEW A
E
VENT ON A
L
OG
If a channel is associated with the Database Explorer and the media is still
available on the Preview recorder, you can use the following options to view the
A/V media relevant to the log entry:
• Selecting the log event will cue the record train at the log entry TC on the
database window’s associated output channel.
• Using the arrows in the menu bar or the next train, previous train buttons on the
ShuttlePRO will change between available record trains on the log entry TC
value.
3.6.8 H
OW TO
M
AKE
A
UTOMATIC
C
LIPS
B
ASED ON A
L
OGGED
E
VENT
To automatically make a clip based on a log entry on the record train selected as
the preview recorder, proceed as follows:
1. Click on the event on the log sheet in the Database Explorer.
2. Drag the log entry onto a bin in the Database Explorer tree or onto an
open BIN window.
A clip or series of clips are automatically created with IN points and OUT points
determined by the values specified in the Clip Creation Settings tab of the Tools >
Settings menu. For more information on this setting, refer to the description of the
Tools menu in the section on IP Director main window.
Note
It is possible to create a clip on all relevant recorders in one single
drag & drop operation simply by holding the SHIFT key on the keyboard.
Note
If the CTRL key is hold during the drag & drop operation, the ‘Save Clip’
window is opened. It is then possible to name the clip and associate
some metadata.