EVS IPDirector Version 4.4 - March 2008 Part 2 User's Manual - Manual (Page 75)

Issue 4.4.C IP Director Version 4.4 – User Manual – Part 2 – Logging and Browsing
EVS Broadcast Equipment – March 2008
62
3.2.15 H
OW TO
S
END A
C
LIP TO AN
XT
OF
A
NOTHER
SDTI
N
ETWORK
T
HROUGH THE
G
IGABIT
N
ETWORK
It is possible to send a clip to an XT belonging to another SDTI network through
the TCP/IC network via the Gigagit Ethernet connection. The transfer will be
performed if the system is correctly set up. For more information, refer to the
Technical Reference manual.
To send a clip to an XT server belonging to another SDTI network, proceed as
follows:
• Select a predefined XT target from the Send To > XT sub menu of the clip
contextual menu.
3.2.16 M
ONITORING
T
RANSFERS
It is possible to monitor all transfers to a destination target, a CleanEdit or Avid
system using the Transfer Information windows available from the Tools >
Transfer Information main menu. This opens the Transfer Information window:
Clip transfers that are not completed appear in the Pending Transfers list. For
every transfer, the following information is displayed: Clip Name, Clip Duration
(including guard bands) and the type of transfer. These fields are described in the
table below.