EVS IPDirector Version 6.2 - June 2013 GENERAL FUNCTIONS User Manual - Manual (Page 146)

Note
To display video on the VGA uses around 25% of the CPU power of the
workstation for a display size of 384 x 288, more if a larger display is required.
The reactivity of the IPDirector interface could be significantly slower if larger
window sizes are used.
Assigning a Channel to a Video Display
Once the physical connection is made, the Video Display panel needs to be linked to the
corresponding PGM video channel connected to the input of the IPDirector Workstation
video card.
To do so, proceed as follows:
1. In the Remote Installer tool, right click on the selected IPDirector box. For more
information about the Remote Installer tool, see the IPDirector Technical Reference.
A contextual menu is displayed:
2. Select Edit Config.
The IPDirector Configuration window opens:
This window allows you to link a player channel of one specific EVS video server to
one Video Display (Video Board).
3. Check the box in the Linked column corresponding to the player channel you want to
link to the video display.
134 10. Display Tools
EVS Broadcast Equipment S.A. - June 2013 Issue 6.2.A