EVS IPDirector Version 6.2 - June 2013 GENERAL FUNCTIONS User Manual - Manual (Page 157)

2. Right-click the selected clip in the grid.
The Clip contextual menu is displayed.
3. Select Edit.
The Edit Clip window appears and allows you to modify the clip type.
4. Select the Fill button to define the clip as Fill clip.
Select the Key button to define the clip as Key clip.
How to Edit the Clip Type from the Control Panel
To edit the metadata of an existing clip from the Control Panel, proceed as follows:
1. Load the clip on the Control Panel.
2. In the Clip Information tab,
◦ select the Fill button to define the clip as Fill clip.
◦ select the Key button to define the clip as Key clip.
11.2.3. Fill and Key Clips Association
How to Manually Associate Two Clips as Fill and
Key
To manually associate two clips in a Fill and Key association, proceed as follows:
1. In the Database Explorer, select a clip 1 (Normal, Fill, or Key).
2. Drag it onto a clip 2 (Normal, Fill, or Key), keeping the CTRL and SHIFT keys
pressed.
IPDirector - Version 6.2 - User Manual - General Functions
11. Fill and Key 145