Remote panel operations, Main menu, How to unlock a remote panel – EVS XSense Version 11.02 - July 2013 Operating Manual User Manual
Page 18: Introduction

Press ENTER to confirm the locking of the remote.When a remote is locked:
◦
The CLEAR and MENU keys, used for unlocking, are flashing green.
◦
All other keys are continuously lighting red.
◦
The jog brake is activated.
◦
All keys, and the jog beep if pressed or operated, except the CLEAR and MENU
keys, used for unlocking.
In addition, the following message is displayed in the middle of the current screen:
Msg: Clear+Menu to unlock the remote
How to Unlock a Remote Panel
To unlock the remote, press again the CLEAR key then, within 2 seconds, the MENU
key. The remote goes back to its operating mode.
2.3.
Remote Panel Operations
2.3.1.
Main Menu
Introduction
After the boot sequence of the Multicam system, the LCD screen of the Remote Panel
will display the Main menu:
2Rec 4Play
Server
Ver:11.00.xx
F1: 1 Remote F6: Exit
F2: 2 Remotes F7: Clear all clips
F3: 3 Remotes F8: Stop Record
F4: 4 Remotes F9: Fill Playlist
F5: Char. On/Off F0: Technical setup
Split
Paint
Target
Setup
1PGM+PRV
2 PGM
10
2. Working Interfaces
EVS Broadcast Equipment S.A.
Issue 11.02.A July 2013