EVS XEDIO CleanEdit Version 3.1 - January 2011 User Manual - Manual (Page 176)

Xedio Suite Version 3.1 – User’s Manual – CleanEdit
EVS Broadcast Equipment – January 2011
Issue 3.1.B
165
9.4.3 H
OW TO
A
DJUST THE
O
VERALL
L
EVEL OF A
T
RACK
To adjust the audio level of a whole track, proceed as follows:
1. Click on the Audio/Video FX button .
The Video/Audio FX window opens with the focus on the Audio Level tab:
2. Tick the Source Channel check boxes corresponding to the tracks whose
audio level you want to adjust.
3. In the Level Adjust box corresponding to each track, select how many dbs you
want to add to or remove from audio level of the track.
4. Select the adjustment mode as follows:
a. If you want to apply the specified db value to the current audio level, tick
the Relative radio button.
b. If you want to apply the specified db value to the original audio level (0db),
tick the Absolute radio button.
5. Click OK.
The audio level of the whole track is adjusted according to the defined value and
adjustment mode.