EVS XEDIO CleanEdit Version 3.1 - January 2011 User Manual - Manual (Page 80)

Xedio Suite Version 3.1 – User’s Manual – CleanEdit
EVS Broadcast Equipment – January 2011
Issue 3.1.B
69
M
OVING
B
ETWEEN
C
UE POINTS
To move to the cue point position on the left of the nowline, click the Left Cue
point button
.
To move to the cue point position on the right of the nowline, click the Right Cue
point button
.
R
EMOVING A
C
UE POINT
To remove a cue point, move to the cue point to be removed using the or
buttons. Then, click the Add Cue point button simultaneously with the CTRL key
on the keyboard.
6.2.10 C
REATING A
C
LIP ON AN
EVS V
IDEO
S
ERVER FROM THE
P
LAYER AREA
G
ENERAL
P
ROCESS
When the media loaded on the Player area is a record train from an EVS Server,
you can save the created clip on the EVS Server and in the Xedio database at the
same time. To do this, you will click the Save button next to the Clip Name field
once you have defined your mark IN and mark OUT:
This will open the EVS Server Data window in which you can specify the
necessary information to save the clip on the EVS Server and on the Xedio
database.