3 clip creation functions, 4 timecode information, Clip creation functions – EVS XEDIO Cutter Version 3.1 - January 2011 User Manual User Manual
Page 26: Timecode information, 21 a, Reation, Unctions, Imecode, Nformation

Xedio Suite Version 3.1 – User’s Manual - Xedio Cutter
EVS Broadcast Equipment – January 2011
Issue 3.1.B
21
•
If you click on the dark grey area and drag it, you shift the portion of media
included in the top area. The dark grey area is enlarged or reduced
accordingly.
In this case, if the portion of the upper area covers only a part of the media,
the nowline may disappear. Then, a red indicator, on the left side or on the
right side of the media bar will be displayed.
A click on that indicator will focus on the nowline.
3.3.3 C
LIP
C
REATION
F
UNCTIONS
Operation User
Interface
Button
Description
Mark IN
Sets an IN point at the current position.
The timecode of the IN point is then
displayed in the IN field.
Mark OUT
Sets an OUT point at the current
position. The timecode of the OUT
point is then displayed in the OUT
field.
3.3.4 T
IMECODE
I
NFORMATION