EVS XEDIO Cutter Version 3.1 - January 2011 User Manual - Manual (Page 31)

Issue 3.1.B Xedio Suite Version 3.1 – User’s Manual - Xedio Cutter
EVS Broadcast Equipment – January 2011
26
3.5 MAKING A CLIP
When a media has been loaded on the Player Panel, a clip can be made from the
media.
To do so, proceed as follows:
1. Determine the IN point for the clip in one of the following ways:
• use the transport functions, or
• drag the nowline to the selected position, or
• enter a value in the IN field
2.
Press the button to mark the IN point.
On the video display, a ‘ [ ‘ is shown on the frame and a green line appears
on the media bar.
3. Determine the OUT point for the clip in one of the following ways:
• Use the transport functions, or
• Drag the nowline to the selected position, or
• Enter a value in the OUT field.
4.
Press the button to mark the IN point.
On the video display a ‘ ] ‘ is shown on the frame and a red line appears on
the media bar.
5. If needed, select the audio for the clip.
6. Enter a name for the clip in the Clip Name field.
You can then use the clip in the Storyboard.