Mplay remote configuration, How to assign player channels – EVS IPDirector Version 5.8 - July 2010 Part 1 User's Manual User Manual
Page 106
IPDirector Version 5.8 – User Manual – Part 1: General Workspace
EVS Broadcast Equipment -– July 2010
Issue 5.8.B
95
MP
LAY
R
EMOTE
C
ONFIGURATION
You can access the Remote Control Manager window from the IPDirector main
window, via Tools > Remote Control Manager.
Then, select the tab corresponding to the MPlay Remote device.
Several MPlay remote devices can be connected. In this case, as many tabs are
displayed as they are devices. One of the device is defined as Master, the other
ones as slaves. This is done in the Remote Installer. Refer to the Technical
Reference manual.
How to Assign Player Channels
You will be able to control up to four player channels with one device.
To assign player channels to the MPlay Remote, proceed in one of the following
ways:
•
From the Channel Name contextual menu:
•
Drag-and-drop operation from the Channel Explorer:
1.
Open the Channel Explorer.
2.
Select the player channel and drag it to one of the four Linked Channels