EVS IPDirector Version 5.8 - July 2010 Part 1 User's Manual - Manual (Page 75)

Issue 5.8.B IPDirector Version 5.8 – User Manual – Part 1: General Workspace
EVS Broadcast Equipment – July 2010
64
• from Output GPIs to Input GPIs: the configuration of the last 4 Output GPIs is
cleared.
• from Input GPIs to Output GPIs: a message will warn the user that the TTL GPIs
may be used as Input GPIs in playlist, playlist macro command or timeline
macro command.
I
NPUT
GPI
S
S
ETTINGS
The Input GPIs settings make it possible to configure the action to be triggered on
a given player channel of the EVS server when a given key is pressed on a GPI
connected to this EVS server.
Up to eight GPI inputs can be used on an EVS server.
For each Input GPI, the following information needs to be defined:
• the action triggered by the GPI key on the EVS server.
• the player channel on which the action needs to be executed.
• the type of trigger signal sent by the GPI to EVS server.